The Inhalater Vaporizer operated in a twin heating mode, convection and conduction. Air is routed in a heated space prior to going through the substrate which is itself heated in its container.
Vaporization should not be confused with combustion. Combustion generates ashes and smoke, which is not the case with Vaporization and using vaporizers.
Vaporization is the act of heating until compounds contained in a substrate boil, and turn into vapors.
All heated components are made of health safe materials. Vaporization chamber and capsule are made of polyimide.
Polyimide is an organic resin that exhibits outstanding engineering properties, especially thermal stability, dialectric strength, mechanical strength, temperature stability and chemical resistance, and is used in many medical devices and high end technology. Polyimide is found in NASA space orbiters.
The Inhalater Vaporizer is exclusively conceived to be used as a phytotherapeutic device. Use uniquely with completely dried and finely shredded material.
Water vapors from a humid substrate can cause severe burns. Always start vaporisation at low temperature when trying untested substrates.
Shred substrate as finely as possible. Remove cap from Inhalater and capsule from vaporization chamber. Insert substrate in capsule using your index. Replace capsule in vaporization chamber. Activate temperature control and select preferred temperature. Operation light will flash until desired temperature is reached.
For smooth and discrete vaporization, select a low temperature. 1 is lowest temperature, 10 is highest. For stronger and more visible vaporization, raise gradually temperature You may taste substrate or change temperature anytime.
Vaporization is complete when substrate is uniformly heated brown. Once finished, wait for apparatus to cool down and empty capsule. Replace capsule in vaporization chamber and replace apparatus cap. The Inhalater INH004 Vaporizer is programmed to auto shut-off after 6 minutes. You may turn it off anytime by turning temperature control to the Off position.
Battery autonomy should be over 6 cycles when fully charged. Discharged batteries will prolong heating time. When completely discharged, the Inhalater Vaporizer will auto shut off.
To recharge Inhalater Vaporizer battery, plug power cord into Inhalater. Green charging light indicator will come on until battery is completely charged. When completely discharged, full recharging time is 5 hours. When completely discharged and plugged with power cord, up to 30 minutes of recharging time may be required to have necessary power for using while recharging. Charging ratio is 6:1. 6 minutes of charging are necessary for 1 minute of operation.